24
INSTALLATION
10
TURN THE WATER ON AT THE SHUTOFF
VALVE
Tighten any connections that leak.
CAUTION
Check to see if leaks occur at the water
line connections.
11
PLUG IN THE REFRIGERATOR
Arrange the coil of tubing so that it
does not vibrate against the back of the
refrigerator or against the wall. Push the
refrigerator back to the wall.
12
START THE ICEMAKER
Set the icemaker power switch to the ON
position.
The icemaker will not begin to operate
until it reaches its operating temperature
of 15°F (–9°C) or below. It will then begin
operation automatically if the icemaker
power switch is in the ON (I) position.
Turning On The Power
1
Plug in the refrigerator.
CAUTION
Connect to a rated power outlet.
Have a certified electrician check
the wall outlet and wiring for proper
grounding.
Do not damage or cut off the ground
terminal of the power plug.