Tighten all three bolts.
Picture 3
Picture 5
To fit the upper radiator guard
Remove the two bolts arrowed in pictures 3 and 4.
Remove the spacer/bolt arrowed in picture 5.
Place the radiator guard into position and secure the top mounts as shown in pictures 3 and 4.
Reuse the original spacer/bolt and secure the lower mount as shown in picture 6
Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0) 1420 89007 Fax : +44 (0) 1420 87301 Email: info@rg-racing.com
Issue 1 13/04/2012 (NSY)
R&G Racing
Picture 4
Picture 6