ATOMSTACK A48 PRO Manuel page 9

Machine introduction and component installation
LASER: Laser cable input port
EXPAND INTERFACE: Expansion interfaces, accessories(chucks, rollers, conveyors)output ports
RESET : Restart the machine
SCREEN : Connect the display screen for offline control
USB : Insert a USB flash drive for firmware flashing and program testing
Y-INTERFACE: Used for switching chuck/roller/conveyor
Y-INTERFACE: For switching between Y-axis motor interface and machine Y-axis motor
48W/24W switch
Emergency : Machine power switch
ALARM: Tilt and flame triggered alarm
lock: Safety lock, requires a key to unlock and use the machine
OUTPUT : Power supply for the air pump
INPUT: Power supply for the machine
CUMPUTER: Connect to the PC via
Lightburn or LaserGRBL control
06