ATOMSTACK A48 PRO Manuel page 27

Instructions for exporting nc and gc format files
a.LaserGRBL software
1) Import the picture to be engraved or cut into laserGRBL, after setting
the engraving speed and energy parameters etc., click File, and select
Quick Save
b.Lightburn software
1) Import the picture to be engraved or cutted into lightburn, after
setting the engraving speed and energy parameters etc., click Save
Gcode.
Save GCode
USB Drive（H)
2) Select USB Drive（H) as the save path, click Save to
generate nc file.
USB Drive（H)
2) Select USB Drive（H) as the save path, click Save to
generate nc file.
24
Save
Save