Télécharger Imprimer la page

Kuppersbusch KI9800.0SF Mode D'emploi page 30

Publicité

Les langues disponibles

Les langues disponibles

• Setting and modification of the cooking time :
Action
Select the power level
Select theTimer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
• To stop the cooking time:
Action
Select the Timer
Stop the time
If several timers are activated, repeat the process.
• Egg timer function :
Egg timer is an independent function. It stops as soon as a heating zone starts up.
If the egg timer is on and the hob is switched off, the timer continues until time runs out.
Action
Activate the hob
Select the Timer
Decrease the time
Increase the time
After a few seconds, the [ min ] display stops with blinking.
The time is confirmed and the timer starts.
• Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blinking [ 000 ] and a sound
rings.
To stop the sound and the blinking, press the key [ - ] and [ + ].
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power for a certain time, and then reduces automatically its power to the pre-selected level.
• Start-up :
Action
Power level selection
(for example « 7 »)
• Switching off the automatic cooking :
Control panel
slide on the "SLIDER"
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
Press simultaneously key [ - ] and [ + ] Timer display on
from the timer until the
desired display is on
Press key [ - ] from the timer
Control panel
press key [
]
Press simultaneously key [ - ] and [ + ] [ 000 ]
from the timer
Press key [ - ] from the timer
Press key [ + ] from the timer
Control panel
slide on the "SLIDER" to [ 7 ]
and hold 3s
30
Display
[ 1 ] to [ P ]
[ 60 ] to 59, 58...
Time increase
Display
[ 000 ]
Display
[ 0 ]
[ 60 ] to 59, 58...
Time increase
Display
[ 7 ] is blinking with [ A ]

Publicité

loading

Ce manuel est également adapté pour:

Ki9800.0sr