Publicité
Les langues disponibles
Les langues disponibles
Operation
To Advance to
To Change This
the Next Screen:
Setting:
Press SCROLL (
)
Press "SELECT" ( ^ )
v
13
The FACTORY DEFAULT selection screen will appear.
To Advance to
To Change This
the Next Screen:
Setting:
Press SCROLL (
)
Press "SELECT" ( ^ )
v
Note: The UPS must be
in Standby Mode to
change this setting.
Continued on page 24.
NO BP*
SCROLL
SELECT
Factory
UPS MODEL
Default
SU750RTXLCD2U
NO BP BP24V15RT2U BP24V28-2U
SU1000RTXLCD2U
NO BP BP24V15RT2U BP24V28-2U
SU1500RTXLCD2U
NO BP
SU2000RTXLCD2U,
NO BP
SU2200RTXLCD2U
SU3000RTXLCD3U
NO BP
Scroll through available values and press SELECT ( ^ ) to SET.
Factory default = NO BP
If you're planning on using your UPS with the additional supported battery pack option
listed above as battery pack option 3, EXTERNAL BATTERY CONFIGURATION TOOL software
is required. After the EXTERNAL BATTERY CONFIGURATION TOOL software is used, the UPS
will display the resulting configuration as "BP TOOL" on the LCD screen. BP TOOL is present
as an LCD viewable option, but is itself not selectable (if BP TOOL selection is attempted,
the screen will report "READ ONLY. SELECT BY BP TOOL" to confirm the selection has not
been accepted). EXTERNAL BATTERY CONFIGURATION TOOL software is a Windows only
application and requires a serial cable connection to the UPS in order to run.
Visit tripplite.com/bpconfig to download the software.
Battery Pack Models That Require Use of EXTERNAL BATTERY CONFIGURATION TOOL
Software:
UPS MODEL
SU750RTXLCD2U
SU1000RTXLCD2U
SU1500RTXLCD2U
SU2000RTXLCD2U,
SU2200RTXLCD2U
SU3000RTXLCD3U
FACTORY DEFAULT gives users a quick and easy way to return the UPS to its' original
factory configuration. When selecting YES to FACTORY DEFAULT in the LCD Set-Up screens,
the UPS will immediately revert to the original shipping configuration and set of presets.
Running a FACTORY DEFAULT will restore these factory settings:
OUTPUT VOLTAGE = 120
OUTPUT FREQUENCY = 60Hz
BYPASS RANGE = WIDE
OVERLOAD ALARM = 105%
SHUTDOWN AFTER = DISABLE
BATTERY SAVE = DISABLE
STANDBY MODE = NO OUTPUT
FREQ CONVERTER = DISABLE
NO
SCROLL
SELECT
23
Press "SELECT" ( ^ ) to SET this value.
Press "SCROLL" (
Available values are:
Configure via LCD
Battery pack
Battery pack
option 1
option 2
BP48V24-2U BP48V60RT3U
BP48V24-2U BP48V60RT3U
BP72V15-2U BP72V28RT-3U
BATTERY PACK MODEL
BP24V70RT3U (for any number)
BP24V70RT3U (for any number)
BP48V60RT3U (for more than 1)
BP48V60RT3U (for more than 1)
BP72V28RT3U (for more than 1)
ECONOMY MODE = DISABLE
COLD START = ENABLE
BATTERY TEST = MONTHLY
EXTERNAL BATT = NO BP
FACTORY DEFAULT = YES
AUDIBLE ALARM = ENABLE
ALARM HISTORY = ALL MESSAGES CLEARED
INFORMATION = NO CHANGE
Press "SELECT" ( ^ ) to SET this value.
Press "SCROLL" (
Available values are: NO, YES
Scroll through available values and press SELECT
( ^ ) to SET.
Factory default = None
) to advance to the next option.
v
Configuration via EXTERNAL BATTERY
CONFIGURATION TOOL software
Battery pack option 3
(BP TOOL on LCD display)
BP24V70RT3U (for any number)
BP24V70RT3U (for any number)
BP48V60RT3U (for more than 1)
BP48V60RT3U (for more than 1)
BP72V28RT3U (for more than 1)
) to advance to the next option.
v
Publicité
