Topaz ARL-150PCS-T3 Instructions D'installation page 2

Item:
ARL-150PCS-T3 ARL-150PCS-T4
ARL-300PCS-T3 ARL-300PCS-T4
ARL-480PCS-T3 ARL-480PCS-T5
ARL-150PCS-T5-HV ARL-300PCS-T3-HV
ARL-480PCS-T3-HV ARL-480PCS-T5-HV
ARL-300PCS-SWO
LED AREA LIGHT POWER & CCT SELECTABLE
INSTALLATION INSTRUCTIONS
Bracket Installation Instructions:
1. Slipfitter Mounting:
Figure 1
2. Pole Mounting:
Figure 3
3. Trunnion Mounting:
Figure 5
4. Direct Pole Mounting:
Figure 7
CCT and Wattage Selection:
www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
ARL-150PCS-T5
ARL-300PCS-T5
ARL-150PCS-T3-HV
ARL-300PCS-T5-HV
ARL-150PCS-SWO
1. Remove the mounting screws on the fixture and run the
2. Install the bracket onto the fixture using the screws taken
Figure 2
1. Remove the bracket mounting screws on the fixture, open
2. Install the bracket onto the fixture, then cover the side lid
Figure 4
1. Remove the bracket mounting screws on the fixture and
2. Install the bracket on the fixture. See Figure 6.
Figure 6
1. Guide the fixture wires through the mount and guide the
2. Install the 4 bolts to secure the mount to the fixture. See
Figure 8
1. Unscrew the ¾" plug.
2. Set the switch to the desired CCT and Wattage to best suit
3. Install and tighten the ¾" plug once the selection has been
wires through the bracket. See Figure 1.
out in the previous step. See Figure 2.
the side lid of the bracket and run the wires through the
bracket. See Figure 3.
and tighten. See Figure 4.
run the wires through the bracket. See Figure 5.
bracket over side mounting holes.
Figure 7.
the application environment.
made.