PawHut D00-165V00 Mode D'emploi page 3

2.Folding frame
In the braking state,unzip the zipper and close the canopy first.And then,lift up the
two sides of the folding keys,hold the handle to press down.The frame can be
folded and hang the hook finally.
Use of wheels
1.Install & disassemble front wheels :
Insert the front wheel set into the front wheel seat, it is installed when hear
"Click".Press the buckle on the front wheel seat with your hand and pull it down,
then the front wheel set is removed.
2.Install & disassemble rear wheels:
Insert the rear wheel set into the rear wheel seat, it is installed when the barb on the
rear wheel seat pops out .Hold the barb on the rear wheel seat and pull it out, the
rear wheel set can be removed.
2