Publicité
Les langues disponibles
Les langues disponibles
Environment
Environment protection first !
i Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
If there is a problem?
Problem
• Water drips from the
holes in the soleplate.
• Brown streaks come
through the holes in
the soleplate and
stain the linen.
• The soleplate is dirty
or brown and can
stain the linen.
• There is little or no
steam.
• The soleplate is
scratched or
damaged.
• Water is leaking out
through the water
tank cover.
• Steam or water come
from the iron as you
finish filling the tank.
• The spray and/or shot
of steam do not work.
• Water leaks out of the
front of the iron.
If you have any problem or queries, please contact our
Customer Relations team first for expert help and advice.
Possible causes
• You are using the Shot of Steam button too often.
• You have stored the iron horizontally, without
emptying it and without setting it to DRY.
• You are using chemical descaling agents.
• You are using pure distilled/demineralised or
softened water.
• Your linen is not rinsed sufficiently or you have
ironed a new garment before washing it.
• You have ironed with an unsuitable
programme (temperature too high).
• You are using starch.
• The water tank is empty.
• The anti-calc valve is dirty.
• Your iron has a build-up of scale.
• Your iron has been used dry for too long.
• You have placed your iron flat on a metallic
rest-plate or ironed over a zip.
• You have cleaned your soleplate with an
abrasive or metal pad.
• You have not closed the water tank cover
properly.
• The steam control is not set to the DRY
position
.
• The water is empty.
• You have exceeded the level MAX when filling
the water tank.
Name of manufacturer : CALOR S.A.
220-240V a.c. 2010-2400W
220-240 V a.c. 2185-2600W
Made in France
845 602 1454 - UK / (01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
Solutions
• Wait a few seconds between each use
• See the section "Storing your iron".
• Do not add any descaling agents to
• See section "Types of water not to use?".
• See section "Cleaning the soleplate".
• Ensure linen is rinsed thoroughly to
• Select the appropriate program.
• Spray starch on the underside of the
• Fill it.
• Clean the anti-calc valve.
• Clean the anti-calc valve and carry out
• Carry out a self-clean.
• Wait for the soleplate to reach the
• Always set your iron on its heel.
• Try to avoid ironing over zips.
• Refer to the chapter "Clean the
• Make sure the water tank cover has
• Check that the steam control is
set to the DRY position
• Fill the water.
• Empty the surplus water out of the
50/60Hz
of the button.
the water in the water tank.
remove any soap deposits or
chemicals on new garments which
may be sucked up by the iron.
Refer to the chapter "Clean the
soleplate"
fabric to be ironed.
a self-clean.
correct temperature.
soleplate".
clicked shut.
.
water tank.
3.12 104
GB
F
SA
FA
ZHS
KO
TH
7
Publicité
