F.F. Group DWM 200PRO Notice Originale page 8

8 | English
ENGLISH
SAFETY WARNINGS
BEFORE USING THIS EQUIPMENT IT
IS RECOMMENDED TO READ THIS IN-
STRUCTION MANUAL!
IN CASE OF MISSING READING, CASES
OF FAILURE AND/OR DANGERS FOR
THE USER COULD HAPPEN!
THE UNIT CAN ONLY BE USED BY PEO-
PLE WHO PERFECTLY kNOW THE SPE-
CIFIC SECURITY RULES!
This manual is an integrant part of the
equipment and it must be attached in every
displacement or resale. It is user's respon-
sibility to keep it intact and in good condi-
tions. The manufacturer has the right to
apply modifies in every moment or without
any forewarning.
This equipment is designed solely for
industrial or professional use. As such,
only experienced or fully-trained peo-
ple should use the equipment. The user
and/or owner is responsible for ensuring
inexperienced personnel does not have
access to the equipment.
A workman must look after his tools
carefully ! Remember that any tool or
equipment can become a hazard if it is
not looked after properly. Equipment
in a state of discrepai or neglect can be
dangerous. If it does not operate prop-
erly or overheats, the electricity supply
should be removed immediately and the
unit should be returned to the supplier
for repair.
Read this manual carefully before using
your Welder. You can then do a better and
safer job. By reading this manual you will
learn more about the possibilities, limita-
tions and potential dangers of welding.
Retain this manual for the entire life of
the equipment. It should be kept within
the operator's reach at all times.
All equipment connected to electric pow-
er supplies can be dangerous if the man-
ufacturers instructions are not read and
observed. Read, understand and observe
these safety instructions to reduce the
risk of death or injury from electric shock.
Ensure that even bystanders are aware of,
and understand, the dangers that exist in
the welding area.
The safety information contained in this
manual is a guide to ensure you are not
subjected to unnecessary risks. Howev-
er, the operator must be competent and
careful at all times.
The constructor declines all responsibility
for injury or damage caused by inexperi-
enced, improper or neglectful use of its
equipment.
Fires and explosions can seriously injure
or cause damage! Read, understand and
observe all safety warnings to reduce the
risk of death or injury from fire or explo-
sion. Pay particular attention to the fact
that even bystanders should be aware of,
and understand, the dangers existing in
the welding area. Remember that weld-
ing, by nature, produces sparks, hot spat-
ter, molten metal drops, hot slag and hot
metal parts that can cause fires, can burn
skin and damage eyes.
Arc rays can damage your eyes and burn
your skin ! Read, understand and observe
all safety warnings to avoid damage from
arc rays. Pay particular attention to the
fact that even bystanders should be aware
of, and understand, the dangers existing in
the welding area. Wear a protective mask
and make sure bystanders do the same.
Fumes, toxic gases and vapors can be
harmful! Read, understand and observe
all safety warnings to avoid harm from
toxic welding gases. Pay particular at-
tention to the fact that even bystanders
should be aware of, and understand, the
dangers.
Carelessness while using or maintaining
the compressed gas cylinders or regula-
tors can injure or kill the operator and/
or bystanders! Read, understand and ob-
serve all safety warnings to avoid the dan-
gers of compressed gas. Pay particular at-
tention to the fact that even bystanders
should be aware of, and understand, the
dangers.
HIGH VOLTAGE
The unit carries potentially lethal voltage.
The high voltage areas of the equipment
have been segregated and can be reached
only by using tools that are not provided
with the Welder. All maintenance or re-
pair operations requiring access to such
areas may only be performed by construc-
tor-trained technicians.
FOREIGN OBJECTS
Never block the air vents with foreign ob-
jects and avoid any contact with liquids.
Clean using just a dry cloth. These safety
precautions apply even when the unit is
switched off.
DWM 200 PRO