Drive DeVilbiss Healthcare DSR 130 Mode D'emploi page 9

Assembly
The shower chair is preassembled; only the back rest
needs to be clicked into place and the 4 adjustable feet
need to be assembled (pic. 1).
1
Technical data
Produkt
Article number
HMV-Nr.
Total width, lowest position / Highest position
Total height, lowest position / Highest position
Total depth, lowest position / Highest position
Seat width x Seat depth
Seat height
Backrest height
Total weight
Load max.
Drive Medical GmbH & Co. KG | As per: 16.06.2020 | Errors and alterations excepted
Height adjustment of the feet
Before using the product, ad-
just it to the desired height
(pic. 2). To adjust the height of
the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the button
clicks into place in the de-
sired position (2). Ensure that
the pushbutton has correctly
clicked into place.
Ensure that all four legs are adjusted to the same height.
Cleaning | Maintenance
• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
DSR 130
550200300
04.40.03.2030
54 cm / 55 cm
86 cm / 96 cm
55 cm / 57 cm
41 cm x 41 cm
42 - 52 cm
48 cm
3,48 kg
130 kg
EN
2
9
Instructions for use DSR 130