GE Appliances Zoneline AZ45 Serie Manuel D'utilisation page 19

Installation Instructions
230/208 VOLT ELECTRICAL CONNECTION OPTIONS
POWER
CORD CONNECTION
appropriate kit is determined by the voltage, the means
of electrical connection and the amperage of the
branch circuit.
Power supply kit
(Appearance may vary)
All wiring, including installation of the receptacle,
must be in accordance with the NEC and local
codes, ordinances and regulations. Codes require
the use of an arc fault or leakage current detection
sure to select the correct cord for your installation.
Tandem Perpendicular
Branch Circuit and
Unit Amperage Rating
49-7774
Large
Tandem
Proper GE Appliances
Power Cord
with LCDI Device
Power cords may include an arc fault
interruption or a leakage current detection
interruption device. A test and reset button is
provided on the plug case or the inline case.
The device should be tested on a periodic basis
by first pressing the TEST button and then the
RESET button. If the TEST button does not trip
or if the RESET button will not stay engaged,
discontinue use of the Zoneline and contact a
qualified service technician.
ELECTRICAL SUBBASE
CONNECTION
Branch Circuit and
Unit Amperage Rating
Electrical subbases provide an enclosure for direct
includes the power cord.
the installer to ensure the connection of components
is done in accordance with these instructions and all
electrical codes.
installation.
DIRECT CONNECTION
Branch Circuit and
Unit Amperage Rating
Review installation instructions provided with power
cord or direct connect kits for detailed assembly
instructions.
installation.
Proper GE Appliances
Subbase Kit
Power Supply Kit