CASO DESIGN 2871 Manuel D'instructions Original page 32

• Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
• The electrical outlet must be protected by a 16A safety cut-out switch.
• The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.
16 Design and Function
In this chapter, you'll find important information on the design and function of the device.
16.1 Overview
10 cutting plate medium (5mm)
12 fixing ring
► Avoid to operate the meat grinder unloaded as this may cause wear marks on the
blades. Anyway those marks do not influence the quality or the grinding result.
11 cutting plate coarse (8 mm) 15 cutting plate fine (3 mm)
13 sausage accessory
Please note
14 dough accessory with pattern
1 motor unit
2 switch
(REV, OFF,
1, 2)
3 locking
handle
4 tube inlet
5 pusher
6 hopper
plate
7 head tube
8 snake
9 blade
32