Télécharger Imprimer la page

Danby One PLUG SMM-7A1 Manuel Du Propriétaire page 14

Masquer les pouces Voir aussi pour One PLUG SMM-7A1:

Publicité

Les langues disponibles

Les langues disponibles

CARE AND MAINTENANCE
CLEANING
Turn off and unplug the appliance
before performing any cleaning.
The inside of the appliance should
be cleaned with a warm, damp
cloth and mild detergents. Do not
allow food splatters to build up
on the inside of the appliance as
this can affect the effi ciency of the
microwave and if suffi ciently dirty,
can ignite and cause fi re.
The outside of the appliance should
be cleaned with a warm, damp
cloth. To avoid damage to internal
components, do not allow any water
to drip into the ventilation openings.
Clean the door and window on
both sides, the door seals and the
adjacent parts frequently with a
damp cloth to remove any spills
or splatters. Do not use abrasive
cleaners.
Do not allow the control panel to
become wet. If necessary, clean the
control panel with a damp cloth and
then wipe dry.
The glass tray can be removed and
cleaned in warm water and mild
detergent or can be placed in a
dishwasher.
The roller ring and oven fl oor
should be cleaned regularly to
avoid excessive noise or spilling.
The roller ring can be cleaned in
warm water and mild detergent
or can be placed in a dishwasher.
Ensure that the roller ring and glass
tray are replaced in the proper
position to avoid noise or spilling.
MAINTENANCE
To remove odors from the
microwave:
1. Combine a cup of water with
the juice and skin of one
lemon in a microwavable
bowl.
2. Microwave on full power for
5 minutes.
3. Wipe the inside of the
appliance and glass tray and
roller ring thoroughly with a
warm, damp cloth.
MICA SHEET
Inside the appliance there is a
cardboard mica sheet protecting
the magnetron. Do not remove
this from the appliance as
exposing the magnetron to food
splatters can cause arcing or fi re.
If it becomes dirty, the mica sheet
can be cleaned with a warm
cloth.
DISPOSAL
This product should not be
treated as ordinary household
waste, it should be transported to
the appropriate collection point
for the recycling of electrical
components. For information
on local waste collection points,
contact your local waste disposal
agency or government offi ce.
13

Publicité

loading