Capturing images from an analog video unit using a PC
(page 13-15)
You can capture images from an analog video unit connected to your
PC via the media converter using the DV (i.LINK) connector.
You can operate the analog video unit from the PC by connecting to the
LANC (Local Application Control Bus System) connectors of the media
converter and the analog video unit. (Compatible software is required
for respective operations in the PC.)
In this case, you can edit a movie or add titles using your PC. You can
also print out the captured images using your PC printer instead of a
video printer.
Selecting the audio mode when recording to the DV unit
(page 9)
You can add messages or background music after recording.
When you record to the DV unit from an analog video unit, you can
select 16-bit audio mode for higher quality, or 12-bit audio mode for
adding messages or background music (post sound recording).
Original sound
+
Original sound
Added sound
Listening to the audio with the desired mixing rate (page 12)
When playing back video recorded in 12-bit audio mode on a DV unit
via the media converter, you can listen to: the recorded message and/or
background music only (post sound recording), the original audio, or
the combined audio of both tracks with the desired mixing rate (5
steps).
5
-US