Publicité
Original Bedienungsanleitung FUXTEC FX-SP11100 Set_de_en_ita_rev01
•
Stay alert, watch what you are doing and use common sense when operating a pump.
•
Maintain your pump. If the pump is damaged, make it repair by a specialist before any use.
•
Follow these instructions to use the pump, its accessories, connectors, etc... properly. The
pump must be used only for its prescribed purpose. Any use other than those mentioned in
this Manual will be considered a case of misuse.
•
This pump is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
•
It is necessary to keep children under surveillance, and to make sure that they are not playing
with the pump, or its power cord. Keep children away from the pump when operating.
SYMBOL
The pump must not be disposed of with normal household waste but must be disposed of in
accordance with local environmental regulations.
Conformity with safety rules applicable in the EU market.
Read the instructions before use.
To be checked before you start
Pumps have been designed to suck clear water only.
Drain pumps have been designed to suck clear water or dirty water with particles.
The pump must be installed on a flat and solid surface.
It is not suitable for professional use (including continuous operation)
GETTING STARTED
1,Connect a discharge pipe with a diameter at least equal to the diameter of the pump outlet
2. Immerse the pump in the liquid to be sucked, by making an angle of 45 degrees (to reduce the
amount of air trapped in the pump body). If the pump rests on the bottom, make sure it is on a flat and
stable surface.
3. Make sure that no one is present in the liquid to be pumped
4. Plug the pump to the mains
14
Publicité
