Worx Landroid S 300 Manuel D'instructions page 14

General safety warnings
WARNING: Read all safety warnings
and all instructions.
warnings and instructions may result in electric
shock, fire and/or serious injury.
Carefully read the instructions for the
safe operation of the machine.
Save all warnings and instructions for
future reference.
Symbols
Warning
Read the operator's manual.
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
Technical data
Rated voltage
Operation instruction
Assembly
Before assembly, make sure Landroid
off.
1. Insert a hard plate into the gap to pry open the
cover.
2. Push aside the tip to open the cover at the
front side of Landroid
please refer to QSG)
3. Attach the inner connectors to the connectors
of the ACS module in the same color until they
click into position.
4. After connection, put the connectors inside, flat
and level. Then fix the ACS module with screws.
NOTE: For better ACS signal, please keep
the tattoo cover (a) smooth and flat with no
decorations.
®
5. Turn Landroid on. Landroid
identify the module and activates the ACS
function.
NOTE: ACS module can only detect the obstacles
higher than 15cm. If the height of the grass is
higher than 15cm, Landroid
obstacle, therefore the grass will not be cut. This
4 4
Failure to follow the
20V Max
®
is turned
®
. (only for specific model,
®
will automatically
®
will detect it as
is recommended to disable the ACS function
manually or via using mobile App. Or else, use a
pushed lawn mower to make a preliminary cut for
your lawn. After the grass is cut to 15cm height or
shorter, you can now activate the ACS function*.
®
When Landroid touches the boundary wire, ACS
function turns off automatically.
Note: Anything unclear above, please
refer to QSG .
* With the ACS function, your Landroid
ability to get round/avoid the obstacles by using
ultrasonic sensor.
Environmental protection
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Declaration of Conformity
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description ACS module
Type
WA0860
Function Obstacle avoidance
Complies with the following Directives:
2014/30/EU, 2011/65/EU & (EU)2015/863
Standards conform to
EN 55011, EN 55014-2
2020/03/27
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd.
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
EN
®
has the