Publicité
Les langues disponibles
Les langues disponibles
Cleaning the main unit
Wash the main unit under
running water.
• Do not damage or rub the
waterproof rubber seal (A) with
hard materials.
Do not leave the main unit under
water. Water may enter inside.
• Do not wash with water hotter than 40 °C.
Doing so may damage the main unit.
Cleaning the AC adaptor and the charging stand
Remove dirt with a dry
cloth.
• Do not wash with water.
Cleaning the brush stand
Wash and wipe off water.
All manuals and user guides at all-guides.com
Cleaning the carrying case
1. Remove the inner frame.
1 Hold the right end of the
carrying case.
2 With the right end of the
inner frame facing up, pull up
the inner frame.
2. Wash with water and
wipe off water.
► After cleaning
Wipe off water from the brush head and main unit for storage.
• Do not charge while it is wet. Doing so may cause soiling.
► If the identification ring comes off
Attach by aligning the indentation (a) in
the brush head with the raised part (b)
of the inside of the identification ring.
• Do not forcefully pull the identification ring.
Doing so may cause damage.
• Using the toothbrush without the identification ring
has no effect on its performance.
19
Publicité
