Basics; Faceplate - Kenwood KMM-BT525HD Mode D'emploi

BASICS

Faceplate

Volume
knob
Detach button
rear of the unit.
Attach Detach
To
Turn on the power
Adjust the volume
Select a source
Change the display information*3
*1 Only for /
*2 For : The power will automatically turn off after 20 minutes when in standby mode (Auto Power Off).
*3 For : You can also turn off the display information by pressing DISP repeatdly. (Page 34)
Display window
/ : USB cable from the
How to reset
Reset the unit
within 5 seconds
after detaching the
faceplate.
On the faceplate
Press B SRC.
• Press and hold to turn off the power.*2
Turn the volume knob.
Press B SRC repeatedly.
Press DISP repeatedly. (Page 34, 35)
/ / /
Remote control (RC-406)
Lights up when
Bluetooth
connection is
established.*1
(Page 19)
controlled with an optionally purchased remote control.
functions are not available.
How to replace the battery
On the remote control
Press and hold SRC to turn off the power.
( Pressing SRC does not turn on the power. )
Press VOL
• Press and hold VOL
Press ATT during playback to attenuate the sound.
• Press again to cancel.
Press SRC repeatedly.
( Not available )
.
(supplied for
Remote sensor (Do not expose to bright
sunlight.)
Pull out the insulation sheet when
using for the first time.
/ / : Can be remotely
/ / : Remote control
or VOL .
to continuously increase the volume to 15.
)
3
ENGLISH