KERN TKDP 10K-3-A Notice D'utilisation Et D'installation page 55

10.2.1 Functions
In the example configuration the following functions are pre-configured:
 Zeroing (->0<-):
The display on the balance is set to zero, the full weighing range is available.
 Taring (TARE):
The current weight value is adopted as the tare value. The new net value is
displayed.
 Pre-TARE:
You can define a tare value (please specify in and with the weighing unit).
 PRINT:
The current weight displayed on the balance is adopted as a value into the
assigned output methods.
 Adjustment (CAL):
Adjustment of the platform is illustrated in the example configuration by a
sequence of commands, which corresponds to the adjustment procedure in the
chapter 9. Please follow the instruction displayed on the screen.
11 Downloads
BalanceConnection Download (online):
•
http://balanceconnection.kern-sohn.com/dl
BalanceConnection manual (online):
•
http://balanceconnection.kern-sohn.com/manual.pdf
KCP-manual:
•
http://kern-sohn.com/kcp
27 KDP-BA_IA-e-2012