Electrical Connection - CONTINENTAL EDISON YC-298B Guide D'utilisation

Electrical connection

Improper use of the grounding plug can result in a risk of
electric shock. If the power cord is damaged, have it replaced by
an authorized service center.
This appliance must be properly grounded for your safety. The
power cord for this appliance is equipped with a three-prong plug
that mates with standard three-prong wall outlets to minimize the
risk of electric shock.
Do not cut or remove the third ground prong from the supplied
power cord under any circumstances. For personal safety, this
appliance must be properly earthed.
This appliance requires a standard 220V / 50Hz three-prong
grounded plug. Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is properly grounded.
When a standard two-prong wall outlet is used, it is your
responsibility and obligation to have it replaced with a properly
grounded outlet. 3-prong wall outlet. The cord should be secured
behind the appliance and should not be left exposed or
suspended to avoid accidental injury.
The appliance must always be plugged into its own individual
electrical outlet, the voltage of which corresponds to that
indicated on the appliance label. This is to achieve the best
performance and prevent overloading the electrical circuits of the
house which could lead to a fire hazard if overheated. Never
unplug the appliance by pulling on the power cord. Always grasp
the plug firmly and pull straight out on the plug. Immediately
repair or replace any power cords that are frayed or otherwise
damaged. Do not use a cord that has cracks or abrasion damage
along its length or at any end. When moving the device, be
careful not to damage the power cord.
EN-21