I
O
P
J
Transportation cap
K
58
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1
Let the heater cool down.
Remove the removable tank ¾ from the heater and remove the fuel filter
2
(Fig. O). Some drops may leak from the filter; keep a cloth at hand. Store the
fuel filter and the removable tank outside the heater.
3
Place the transportation cap into the position of the fuel filter (Fig. P).
Press it tight.
4
Always move the heater in an upright position.
SPECIFICATIONS
Ignition
Fuel
Capacity (kW)
*
Suitable space (m
3
)
**
Fuel consumption (l/hr)
*
Fuel consumption (g/hr)
*
Burning time per tank (hr)
Capacity removable tank (litres) 4.0
Weight (kg)
*
At maximum setting
** Specified values are indicative
WARRANTY PROVISIONS
Your heater comes with a 24-month warranty starting on the date of purchase.
Within this period all defects in material or workmanship will be repaired without
any charge. The following provisions shall apply regarding this warranty:
1
We expressly dismiss all other claims for damages, including consequential
damages.
2
Any repairs or replacements of components within the term of warranty will
not result in an extension of the term of warranty.
3
The warranty will no longer apply, when the heater has been modified,
non-original parts have been used, or when it is repaired by third parties.
4
The warranty will not apply to parts that are subject to normal wear, such as
the batteries, the ignition coil, the wick and the manual fuel pump.
5
The warranty will only apply, when you present the original, dated proof of
purchase, provided no changes have been made to it.
electrical
Dimensions (mm)
paraffin
(including base plate) depth
2.20
35-80
Accessories:
0.229
Required batteries
183
*
17.5
Wick type
Monitoring of the quality of ventilation (air renewal):
7.5
Direct measurement of the CO
width
422
281
height
446
transportation cap
4x LR20, MN 1300
1.5V, size D
F
2
level (NDIR CO
2
sensor ).