Checking The Move Number; Quick Setting Using Auto Repeat; Adjusting The Time; Manual Settings - DGT North American Manuel D'utilisation

15. Checking the Move Number

When the clock is running or paused, you may see the move number by pressing the
button. The running clock is not interrupted by this action.

16. Quick Setting Using Auto Repeat

For fast operation, you can hold the
will repeat.

17. Adjusting the Time

If you make a time correction while using an option with multiple time periods, normally
the clock will assume that the same period that was being used before the correction is
still in effect. So when, for example, during option 9, in time control 2 (Bonus), the time
is corrected to 1 hour the bonus method will stay active. Bonus tournament (option 16)
however, offers the possibility to allot a number of moves for each time control. If the
move numbers for each time control are programmed to a non-zero number then,
during a time correction, the move number can be changed and the correct period is
calculated from that point.

18. Manual Settings

Parameters are saved in every manual set option until you change them or the batteries
are removed. If, after a manual set option, the game is ended and the same manual set
option is selected again, the parameters from the previous setting are saved. See
section 10 for a quick way to start the new game.
If in a multiple time control setting, a period is programmed with zero period time, this
period and the following periods are skipped during the game. When a time control is
programmed with a zero value for thinking time, no further parameters can be set for
this and any subsequent time controls.
Manually setting option 16: Bonus tournament is the most advanced option.
Notice that when the move number for a time control is programmed zero,
that period will end when a player runs through zero time. If zero moves are
programmed for a time control in option 16, all subsequent time controls will
also be set to zero moves automatically. These subsequent period move
numbers cannot be set to non-zero value.

19. Care and Cleaning

Your DGT NA is a durable, well-made product. If you treat it with reasonable care it
should give you years of trouble-free performance. To clean the clock, use only a
slightly-moistened soft cloth. Do not use abrasive cleansers.

20 Warranty conditions

DGT guarantees that your digital chess clock complies with the highest quality
standards. If your DGT North American – despite our care in choosing components and
material, production and transport – nevertheless may show a defect during the first two
years after purchase, you should contact the retailer who sold it to you.
For warranty coverage on your new DGT North American, you should present the
warranty card (page 28) together with proof of purchase. This condition of warranty is
only valid if the DGT North American has been used in a reasonably prudent manner as
it is intended to be used. This warranty shall not apply if the clock has been misused or
if any unauthorized repair attempts have been undertaken without express written
consent from the manufacturer.
, or buttons. After a second, they
11