Télécharger Imprimer la page

Samsung RF28R6241SR Mode D'emploi page 44

Publicité

Les langues disponibles

Les langues disponibles

Operations
Control Lock
08 Sabbath Mode
The Sabbath mode stays active for 85 hours once it is activated. After that, it will be
deactivated automatically.
• To activate Sabbath Mode, press and hold Door Alarm and Water/Ice simultaneously for
5 seconds. When the refrigerator is in Sabbath mode, the buttons, the display, and the
internal lights do not function. The refrigerator and freezer, however, continue to cool.
• To deactivate Sabbath Mode, press and hold Door Alarm and Water/Ice simultaneously
again for 5 seconds.
NOTE
• If the refrigerator powers off and restarts (for example, if there is a power failure),
the Sabbath mode remains active. To end Sabbath Mode, you must deactivate it as
described above.
• Controls must be unlocked before activating Sabbath mode.
09 Cooling Off
Cooling Off mode (also called Shop mode) is designed for use by retailers when they are
displaying refrigerators on a retail floor.
In Cooling Off mode, the refrigerator's fan motor and lights operate normally, but the
compressors do not run so neither the refrigerator nor the freezer become cold.
To enter or exit the Cooling Off mode, press and hold Fridge and Cool Select Zone
simultaneously for 6 seconds. Then, when the display blinks, press Door Alarm.
When the Cooling Off mode is on, the refrigerator chime sounds, and the refrigerator
shows "0" on the fridge temperature display and "FF" on the freezer temperature display.
44
English
Untitled-3 44
To prevent accidental setting changes, press and hold Door Alarm
for 3 seconds. The main panel will be disabled and the Lock
indicator (
) will turn on.
When Control Lock is on, the indicator blinks if any button on the
main panel is pressed.
If you press and hold the button again for more than 3 seconds,
Control Lock will be deactivated.
However, Control Lock will be reactivated if no button is pressed
within 1 minute.
NOTE
Control Lock on the main panel does not affect the dispenser.
The dispenser operates independently and so does the dispenser
lever. To lock the dispenser and the dispenser lever, use the
Dispenser Lock function.
2021-06-07
3:25:00

Publicité

loading