GB
NOTE!
RISK OF DAMAGE!
Improper handling of the handheld vacuum cleaner can cause damage to the vacuum cleaner itself.
Do not suck up sharp objects.
Do not suck up fine particles (e.g. cement, stones, plaster or wood).
Ensure that the filters are correctly inserted and are not damaged before switching on the handheld
vacuum cleaner.
Do not cover over the air vents during operation.
Switch the handheld vacuum cleaner off immediately if you have accidentally sucked up liquids.
Use
1. Press the device's On/Off button to switch it on. The device has low suction power.
2. Press the On/Off button again to use the device with high suction power.
3. Press the On/Off button again to turn the device off.
4. You can attach the crevice nozzle or the 2in1 combi brush directly to the Upright Vacuum Cleaner by pushing
the nozzle into the suction opening.
Use as an air pump
1. Place the desired nozzle on the outlet grille at the rear end of the Upright Vacuum Cleaner.
3. Blow up the desired object or use the nozzles to blow away dirt.
4. Remove the nozzle from the appliance.
Storage
Store the hand-held vacuum cleaner in a dry place away from high temperatures or direct sunlight.
Cleaning and Maintenance
NOTE!
RISK OF DAMAGE!
Improper handling of the handheld vacuum cleaner can result in damage to the vacuum cleaner itself.
Never immerse the handheld vacuum cleaner in water to clean and do not clean with a steam cleaner.
Ensure that no liquids get inside the cleaning unit.
Ensure that all parts, especially the filters, are completely dry before reassembling the handheld
vacuum cleaner after cleaning.
Do not use aggressive cleaning agents, brushes with metal or nylon bristles or sharp or metallic
cleaning tools such as knives, hard spatulas and the like. These may damage the surface.
20
Instruction manual