Lacme CLOS Serie Notice D'utilisation page 12

SENTINEL RESPONDER
 Clos 2000-6 D
They can be associated with Sentinel (de 1 à 4) responders (1 to 4) for increased guard
security. The responder is used to indicate the voltage at the point where it is installed.
Specific instructions for Sentinel responders comes with them.
Connexion example with a Sentinel responder :
FOR ENERGIZERS WITH THE "CONNECT'LD" BADGE
 Clos 2000-6 LED
A LACMÉ 2023
INNOVATION AND
EXCLUSIVITY
*optional
Energizers with the "CONNECT'LD" badge are equipped
with a communication chip; these are devices that can
be connected to the "L.BOX LD".
A Connect'LD energizer, paired with the L.BOX LD, offers many
advantages and services available from your smartphone.
To make the most of it, complete your installation with the
L.BOX LD, whenever you want. The LBOXLD application, only
available on Android is free and without subscription.
 Clos 2000-6 D
*
On "CONNECT'LD" energizers, the usual "LED alarm" is replaced by a blue
"communication LED". It flashes randomly to check whether or not there is an
"L.BOX LD" nearby.
A "CONNECT'LD" energizer paired with the
"L.BOX LD" offers you the following advantages :
 Remote start or stop of your Connect' LD energizer
 Security alerts by notifications
and power adjustment
 Display of the output voltage of your device
 And much more to discover !
— 12 - § EN —
Voltage reading by each
(2)
Sentinel responder when
installed : previous page
For CONNECT'LD
devices :
The communication LED
FLASHES BLUE