Lacme CLOS Serie Notice D'utilisation page 10

Classic schema :
1
2
Schema example + reduced power :
A
1
2
B
Example of a loop connection :
1
2
I. When one end of the fence is
connected to terminal 3 of the unit,
the LED B allows to monitor the proper
functioning of this fence.
A
Wire connected to
"FULL OUTPUT TERMINAL"
3
Wire connected to
"REDUCED OUTPUT TERMINAL"
REDUCED POWER
"
Allows for example to make pens for animals in a state of temporary weakness
(after calving, ... etc.) or susceptible animals while maintaining other enclosures
at maximum power.
A
Insulator
B
3
3
Insulator
II. In this configuration :
- if the green LED (B) lights, the loop is correct (a circuit is achieved)
- If the green indicator (B) is not lit, the wire is cut.
In this case the two segments of the connexion the outward pulses remain
electrified. But that of the return to the energiser remains at a reduced power.
 ALL DEVICES
Insulator
 Clos 2000-6
 Clos 2000-6 D
Insulator
:
"
 Clos 2000-6
 Clos 2000-6 D
Fence wire connected to the
and then looped to
"HIGH OUTPUT POWER"
the terminal "REDUCED OUTPUT"
— 10 - § EN —
Insulator
 Clos 2000-6 LED
Insulator
 Clos 2000-6 LED
Insulator
Insulator