drive. If the WLAN hard drive cannot be found,
place it nearer to the PC and then click Refresh
to start the search again.
When the finder tool has found the WLAN hard
drive, click Log In to go directly to the web
interface. The browser on your Windows PC will
open and the Settings page will be displayed.
In order to display the WLAN hard drive directly in
Windows Explorer, click My Storage.
NOTE!
The files on the data storage device
connected to the WLAN hard drive can only
be displayed in Windows Explorer if the
Samba server is enabled on the WLAN hard
drive
(see "11.4. Services" on page 164).
If you do not want to use the finder tool, open your
web browser and enter http://10.10.10.254 in the
address bar.
15. Resetting the device
The RESET button on the side of the WLAN hard
drive can be used to reset the WLAN hard drive in
the event that the system no longer responds or
you have lost your administrator password.
Press the RESET button with a pointed object
(such as a paper clip) and keep the button pressed
for about five seconds.
168 of 200