Makita PDC1500 Manuel D'instructions page 17

Setting down the unit
CAUTION:
When setting down the unit, place
the unit on a flat and stable surface so that the
unit does not fall.
CAUTION:
Before setting down the tool or
machine, be sure to turn off the tool or machine
and make sure that the cutting tool has com-
pletely stopped.
CAUTION:
Be sure to unlock the chest belt
and the waist belt in order.
Before setting down the unit, remove the tool or
machine from the unit.
Unlock the buckle of the chest belt, then the buckle of
the waist belt, and then set down the unit slowly.
1
1
Fig.46
► 1. Buckle
When setting down the unit on the floor or ground,
unlock the buckle of the chest belt, then the buckle of
the waist belt, and then remove one of the shoulder
straps.
Fig.47
Remove the other shoulder strap, and hold the handle
of the unit while holding the shoulder strap. Set down
the unit slowly on the floor or ground by holding the
handle.
Fig.48
17 ENGLISH