BE Power Equipment BE10500iT Manuel De L'opérateur page 22

It is recommended to clean the oil filter after the first time you use your
generator. After first use, it is recommended to clean the oil filter every 50
hours of use.
OIL FILTER CLEANING
1. Follow the procedure to drain your machine of oil.
2. Locate your oil filter and remove it.
1. Clean debris from inside the filter plug. If it is
particularly dirty, use a detergent to clean.
2. After the filter is cleaned, use compressed air to
dry or allow the filter to air dry and then place the filter
back into position within the machine.
FUEL FILTER CLEANING
1. Remove the fuel tank cap and fuel filter screen.
2. Clean the filter screen with gasoline.
3. Wipe the filter screen dry and place back into tank.
4. Reassemble the fuel tank cap.
22
OIL FILTER SERVICE