BE Power Equipment BE10500iT Manuel De L'opérateur page 15

CHOOSING A FUEL TYPE
GASOLINE START-UP PROCEDURE
1. Switch the fuel source switch to "gasoline"
2. Fill the unit with at least 87 octane gasoline.
LIQUID PROPANE START-UP PROCEDURE
1. Connect the LPG hose to your propane tank.
2. Push back the quick
connector sleeve of the LPG
hose and insert the hose into
the inlet on the unit.
3. Switch the fuel source switch to "LPG"
NATURAL GAS START-UP PROCEDURE
1. Attach the gas pipe adapter to your natural gas
outlet.
2. Push back the quick
connector sleeve of the NG
hose and insert the hose into
the inlet on the unit.
3. Switch the fuel source switch to "NG
AFTER FOLLOWING THE APPROPRIATE STEPS, REFER TO THE
PREVIOUS PAGE TO COMPLETE THE START UP PROCEDURE.
15