BE Power Equipment BE10500iT Manuel De L'opérateur page 12

DISPLAY FUNCTION
1: SESSION RUN TIME: Represents the run time during this use of the machine. Starts
from 0 at each start.
2: TOTAL RUN TIME: Represents the run time throughout the life span of the machine.
(measured in hours)
3: VOLTS - Voltage display
4: Hz - Frequency display
5: LOAD - Shows the load the machine is under.
6: POWER - Actual numerical power display.
7: OVERLOAD - Red light indicates the machine is overloaded.
8: LOW OIL - A red light indicates you do not have enough oil in your machine.
12