Télécharger Imprimer la page

Comfee CVU30W2AST Manuel D'instructions page 9

Alimentation électrique : 120 v, puissance nominale : 70 w, fréquence : 60 hz

Publicité

Les langues disponibles

Les langues disponibles

Determine Wiring Hole Location
1.
Determine and clearly mark a vertical centerline on
the wall and cabinet bottom.
A Centerline
To wire through top:
2.
Mark a line distance (A) from the right of the
centerl ine on the underside of the cabinet. Mark the
point on this line that is from back wall. Drill a
1¼" (32 mm) diameter hole (B) through the
cabinet at this point.
3. The actual size of the product is below, and the user
is installed according to the actual demand
20mm
180mm
To wire through wall:
1.
Mark a line distance (A) from the right of the
centerline on the underside of the wall. Mark the point
on this line that is fr om the underside of
the cabinet. Drill a 1¼" (32 mm) diameter hole (B)
through the rear wall at this point.
2. The actual size of the product is below, and the user
is installed according to the actual demand
20mm
180mm
A
A
B
Centerline
B
A
A Centerline
PREPARE THE LOCATION
Roof Venting
cutout on the underside of cabinet top and bottom:
Mark lines from the back wall on the centerline of
1.
the underside of cabinet.
 .
Mark lines to the right and left of the centerline on the
underside of cabinet.
 .
Use saber or keyhole saw to cut a rectangular opening
for vent.
4 .
Repeat steps 1-3 for the underside of the top of the
cabinet.
5. The actual size of the product is below, and the user
is installed according to the actual demand
5
10
8 (270mm)
4
7
9
8 (251mm)
7
1
(99mm)
3
3
8
8
13
0
16 (20mm)
(Rectangle Ducted version)
Wall Venting
To make a 4 " x 10½" (108 mm x 267 mm) rectangle in
¼
the wall:
Mark lines from the back wall on the centerline of
1.
the underside of cabinet.
Mark lines to the right and left of the centerline on
 .
the underside of cabinet.
Use saber or keyhole saw to cut a rectangular opening
 .
for vent.
Repeat steps 1-3 for the underside of the top of the
4.
cabinet.
The actual size of the product is below, and the user
5.
is installed according to the actual demand
Cabinet
front
1
(114mm)
4 2
1
(105mm)
4
8
9
Centerline
Cabinet cutouts
5
(109.5mm)
16
11 (119mm)
4
16
5
(29.5mm)
1 32
*
From wall, not cabinet
frame
31
5
0
(15.4mm)
0
32
8
3
7
(251mm)
8
8
(270mm)
5
10
8
7
8
(98.8mm)
1
(80mm)
3
8

Publicité

loading