Télécharger Imprimer la page

Ryobi R18RH-0 Traduction Des Instructions Originales page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
4. Press
or
to select the desired minute.
5. Press and release
The clock is now set.
NOTE: If AAA batteries are removed or lose charge for
more than 15 seconds, clock settings will be lost. Settings
are not affected by the removal of the 18 V battery.
AUXILIARY MODE
See figure 3, 4.
The product can be used as an amplifi er for MP3 players,
CD players, smartphones, tablets, and other music devices.
To use the auxiliary mode:
1. Press
until AUX mode is highlighted.
2. Connect auxiliary cable (not included) to the device.
3. Connect the other end of the auxiliary cable to the
auxiliary input port.
NOTE:
The external device must be on and in play mode
for sound to be heard through the speakers.
All external device controls can be used normally
while connected to radio.
Volume for any device connected through the
auxiliary cable can be adjusted using the volume
control for that device or by using
product.
Switching the product off will not switch the external
device off.
The auxiliary cable does not provide charging
function.
4. For complete operating instructions for the connected
device, always refer to the manual that was included
with your device.
The device tray may be used to store your external device.
NOTE: The device tray cannot secure external devices.
NOTE: The AUX OUT port is for connecting external
speakers only. Do not plug headphones into the auxiliary
output port. The volume for this port is set to maximum
level and cannot be lowered with pressing
can be adjusted from the external speaker only. When the
volume is set to 0 from the radio, the external speaker will
be mute.
USING THE USB DEDICATED CHARGING PORT
See figure 5.
The USB dedicated charging port provides charging power
of up to 2 Amps for your cell phone, MP3 player, tablet, or
other USB devices.
again to confirm the time.
or
of the
. Volume
CAUTION
Attempting to charge devices rated more than 2 Amps
could damage the USB dedicated charging port and/or
the device.
1. Connect one end of a USB cable (not provided) to your
USB device.
2. Connect the other end of the USB cable (not provided)
to the USB dedicated charging port to begin charging
the device.
NOTE: The USB dedicated charging port provides
power only; it does not provide any data communication
capabilities.
When the product is operating on battery power, the
USB dedicated charging port will continue to function for
approximately 1 hour after switching the product off. If the
product remains inactive after this time, charging will stop.
Turn the product on to resume operation.
USING A BLUETOOTH ENABLED DEVICE (NOT
INCLUDED) WITH THE PRODUCT
See figure 6.
1. Press
until the BLUETOOTH mode is
highlighted.
NOTE:
When the product is switched to BLUETOOTH
mode, the product will attempt to pair to a
BLUETOOTH enabled device and
the LCD display.
The product will automatically attempt to connect
to the last device it was paired to. If a connection
cannot
be
established
the product will make itself available to other
BLUETOOTH enabled devices.
BLUETOOTH enabled devices must be within 10m
(30 ft) of the product and set to search/scan in order
to pair with the product.
2. Select "Ryobi Stereo" from your device's list of available
BLUETOOTH signals to pair the device and the
product. No password or PIN is required for connection.
NOTE:
When the device has successfully paired with the
radio,
will stop flashing.
When a device is paired to the product, information
for connecting to the device is saved in the radio's
memory.
3. Press
and
to go to the previous or next track
when streaming audio from a BLUETOOTH enabled
device.
4. Press and release
and playing the audio.
NOTE:
will flash in
within
five
seconds,
to cycle between pausing
English |
5
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL

Publicité

loading

Ce manuel est également adapté pour:

R18rh