Publicité
Les langues disponibles
Les langues disponibles
Step 4: Control device via Harmony Power Base APP.
1) Open Harmony Power Base APP that was previously
installed on cell phone as shown in picture below.
2) Click the
and refresh list,then select the control box code
of your base (code also found on the control box a xed to
your base), as shown in the picture below.
3) Refresh list and select the model of your base as shown in
picture below.
Step 5: Open control center and select desired op ons.
NOTE:
If you want to re-set positions,adjust the head or
foot to your desired position, then press the
TV/ZG/Anti-Snore/M1/M2 until you hear 2 beeps
sound. Now, the new positions are saved.
-16-
of
Publicité
