Publicité
Les langues disponibles
Les langues disponibles
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems
Product does not work.
Excessive vibrations.
Leak from the lid.
Leak from the base of
the blender jug.
Leak from the base of
the accessories.
The blade does not turn
easily.
Impossible to lock the
blade unit with the
gasket (c1+c2) on the
jug (c3).
Your blender still does not work?
Contact an approved service centre
(see list in service booklet).
You can customise your blender and
obtain the following accessories from
your usual dealer or from an approved
Causes
The plug is not fitted correctly
into the socket .
The jug or accessory is not
correctly positioned or locked
on the motor unit.
The product is not placed on a
flat, stable, heat-resistant
surface.
Volume of ingredients is too
high.
Volume of ingredients is too
high.
The lid is not correctly
positioned.
The blender jug gasket (c2) is
not positioned correctly or is
missing.
The gasket on the blade unit
(d2) or (e2) is not positioned
correctly or is missing.
Pieces of food too large or too
hard.
The gasket (c2) is not
positioned correctly.
32
Plug the appliance into a
socket and switch on.
Check that the jug or
accessories are correctly
positioned and locked onto
the motor unit as shown in the
figure in the manual.
Place the product on a flat
surface.
Reduce the quantity of
ingredients processed.
Reduce the quantity of
ingredients processed.
Lock the lid correctly on the
blender jug.
Reposition the gasket and lock
the blade holder correctly.
Reposition the gasket on the
blade unit (d2) or (e2) and lock
it correctly onto the bowl (F).
Reduce the size or quantity of
ingredients processed.
Add liquid
Reposition the gasket, the
3 folds should be visible as
shown in Fig. 1.
service
centre:
accessory
(D),
accessory (E), or an additional
blender jug (C).
Solutions
Herb
chopper
Spice
grinder
Publicité
