Publicité
Les langues disponibles
Les langues disponibles
base of the jug (c3). Lock it by
rotating the blade unit through a
quarter turn in the anticlockwise
direction. (Fig. 2).
• Introduce the ingredients into the
assembled jug without exceeding
the maximum level indicated:
* 1.25L for thick mixtures
* 1L for liquid preparations.
• Lock the lid (c4) on the jug. Place
the measuring cup (c5) in its recess
on the lid.
• Place the blender jug assembly (C)
on the motor unit (A). The red lock
(open
is aligned in the slot on the
motor unit. (Fig. 3 - position 1)
• Then rotate the blender jug (C)
through a quarter turn until the green
lock (closed)
position 2).
2 jug positions are possible: handle
on the right or left of the motor unit.
• Do not use the blender for more than
three minutes at a time.
• With the herb chopper (D) you can
chop ingredients like onions, garlic,
meat (cut into pieces) and dry fruits
in a few seconds, make crumbs
(rusk).
Do not use the herb chopper for
liquid preparations (fruit juices, etc.)
• With the spice grinder (E) you can
grind spices in a few seconds:
coriander seeds, pepper, etc.
• These accessories are equipped with
a bowl (F) that prevents access to
the blades during use.
1- Rotate the bowl (F) and pour the
ingredients.
2- Position the gasket (d1) or (e1) in
its recess on the blade unit (d2 or
e2). (Fig. 4). Position the blade unit
on the bowl aligning both the
marks
on the bowl and the
blade unit. Lock the accessory by
rotating the blade unit through a
quarter turn in the anticlockwise
direction. (Fig. 5).
appears. (Fig. 3 -
Caution: leaks can occur if the
accessory is not locked
correctly.
3- Rotate the assembled assembly (D
or E) and position it on the motor
unit. The red lock (open)
aligned in the slot on the motor
unit. (Fig 6 - position 1)
4- Then rotate the assembled
accessory (D or E) through a
quarter turn clockwise until the
green lock (closed)
(Fig. 6 - position 2).
5- Plug in the appliance and turn the
speed selector (B) to the desired
position or apply a few pulses. Hold
the bowl (F) when the appliance
is running. To stop the appliance,
turn the speed selector (B) back
to position "0".
6- Unlock the accessory by rotating it
through a quarter turn in the
anticlockwise direction, until the
red lock (open)
Remove the assembled accessory
(D, E) from the motor unit.
Turn it over on the worktop before
unlocking the blade unit (d2, e2)
from the bowl (F) in the reverse
order of the assembly. The blades
are very sharp: handle them with
caution to avoid injury.
You can then collect the
preparation in the bowl.
* The colour of the bowl may
change after blending certain
very hard ingredients: (cloves,
cinnamon, etc.).
30
is
appears.
appears.
Publicité
