Spypoint CELL-LINK Guide De Démarrage Rapide page 4

PREPARATION
SELECT A POWER SOURCE
•
Lithium or alkaline AA batteries (follow order/polarity indications)
•
12V rechargeable battery (#KIT-12V)
•
4.2V rechargeable battery pack (#LIT-10)
NOTE:
FOR BEST RESULTS AND NO LEAKAGE:
•
Use only new lithium or alkaline batteries.
•
Do not mix old and new batteries.
•
Do not use rechargeable batteries
HOW TO INSTALL AA BATTERIES PROPERLY
•
Unlock and open the CELL-LINK door.
•
Take the battery holder out.
•
Insert the AA batteries into the battery holder following polarity (+) and (-) indications.
•
Place the battery holder back into the battery compartment.
•
Make sure you hear a click when inserting the battery holder into the compartment.
FORMATTING YOUR M
Before inserting the MicroSD card into your CELL-LINK, it must be reformatted via
a computer to ensure proper functionality.
Memory card is sold separately. Whether you choose to use a MicroSD card you
previously used in another device or a brand new one you've just bought, its
capacity must not exceed 32 GB and it must be reformatted. Do no use the "Quick
format" option.
INSERTING A M
•
Ensure the CELL-LINK is turned off and open its door.
•
Insert a MicroSD memory card (up to 32 GB capacity) into the MicroSD
card slot with the label facing up.
•
The card is inserted correctly when a click is heard.
4
We recommend using the SPYPOINT #LIT-10
rechargeable lithium battery pack, sold separately.
(their lower voltage can generate operational issues).
SD CARD
icro
SD CARD
icro