Publicité
Les langues disponibles
Les langues disponibles
Maintaining your appliance
Removing and replacing the oven door
How to remove the door
CAUTION
•
The door is very heavy. Be careful when removing and lifting the door.
Do not lift the door by the handle.
•
Turn the power OFF before removing the door.
Hinge lock
1.
Open the door completely.
2.
Pull the hinge locks down toward the door frame to the unlocked position.
about 5°
Fig. 1
40 English
NE59M4320_DG68-00882A-02_EN+MES+CFR.indb 40
Locked position
Unlocked position
3.
Firmly grasp both sides of the door at
the top.
4.
Close the door to the door removal
position, which is approximately
5 degrees from vertical (Fig. 1).
5.
Fig. 2
How to replace the door
Hinge arm
Bottom
edge of
slot
Indentation
1.
Firmly grasp both sides of the door at the top.
2.
With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
Lift door up and out until the hinge
arm is clear of the slot (Fig. 2).
1/31/2018 12:48:28 PM
Publicité
