Suntec Wellness KLIMATRONIC CoolBreeze 4000 SV Mode D'emploi page 9

Parts name
1. Grille Cover
2. Front Grille
3. Blade Cap
4. Blätter
5. Guard Lock
6. Rear Grille
7. Switch Box
8. Motor Housing
9. Oscillation button
10. Outer pipe
11. Height Adjustment
12. Round Base
13. Weight
14. Base Nut
CAUTION
1. Do not plug the AC cord into the wall outlet outlet until fan has been completely assembled.
2. Use power source of the fan according to electric nameplate at the back of switch box.
How to assemble
1. Mounting the Base:
Pass the Outer Pipe (10) through the round base (12). Fasten the weight (13) with the base nut (14) to the
round base (12).
2. Mounting the switch box:
Caution! never remove the inner pipe.
Release the height adjustment (11) and carefully pull the inner pipe out of the Outer pipe (10).
If you remove the tube, you may need the services of a specialist.
(1) loosen the switch box (7) set screw by turning it to the left
(2) now place the hole in the bottom of the switch box over the inner pipe.
(3) turn the switch box set screw clockwise and tighten it firmly