Publicité
Les langues disponibles
Les langues disponibles
STEP :: 01
* *Tone and vibration come preset and are not adjustable
PREPARE THE REMOTE TRANSMITTER
CHARGE THE REMOTE TRANSMITTER
1. Lift the rubber cover protecting the Charging Jack.
2. Connect one of the charger connectors to the
Charging Jack.
3. Plug the charger into a standard 120/240-volt AC
wall outlet.
4. Charge the Remote Transmitter for 2 hours for the first
charge and every charge thereafter.
Using Li-Ion technology, the Remote Transmitter only
requires a 2 hour charge� It is not harmful to let the unit
charge for more than 2 hours�
5. When charging is complete, remove the charger
connector, and replace the rubber cover. The unit will
preform a brief LCD test, and revert back to the normal
LCD screen.
NOTE: Approximate battery life between charges is
40 to 60 hours, depending on frequency of use.
TRANSMITTER LCD
NOTE: The Remote Transmitter's backlight turns off after 5 seconds to conserve battery life; the LCD display
automatically turns off after approximately 30 minutes.
* Remains solid for continuous static stimulation; flashes once for momentary (nick) static stimulation.
** See STEP 5 for instructions on changing modes.
BATTERY STATUS
STIMULATION LEVEL
STIMULATION INDICATOR*
DOG INDICATOR
VIBRATION INDICATOR
PROGRAM MODE**
BATTERY ICON:
CYCLES LOW, MEDIUM,
AND HIGH DURING
CHARGE. FULL BAR WHEN
COMPLETELY CHARGED.
CHARGER CONNECTOR
PLACED IN THE
REMOTE TRANSMITTER
CHARGING JACK.
TONE INDICATOR
7
Publicité
