Marmitek MEGAVIDEO 55 Mode D'emploi page 4

can be used depends on the cable network in your house. If you want to connect a number
of TVs or use longer cable lengths it is recommended that you use an amplifying splitter. Your
aerial equipment supplier can give you advice on this.
3. Contents of MegaVideo 55 Set
1x Stereo modulator
1x Infrared receiver
2x Power adapter
1x RCA-RCA cable
2x Adapter F-connector to IEC-connector male
2x Adapter F-connector to IEC-connector female
1x Scart doubler
1x Infrared eye RX569
1x User manual
4. Connecting appliances to the MegaVideo 55
modulator
Turn off all appliances before making any connections. Now attach the appliance you want to
connect (e.g. the DVD player) to the MegaVideo 55. There are a number of ways to do this.
Using an RCA cable
All types of composite video signal and audio signal can be connected to the
modulator. This can be done using the supplied RCA cable. Ensure that the plug and
socket colours match each other. That is, red to red, white to white and yellow to yellow.
Using a scart cable
If the appliance you want to connect has a 'scart connection' you can use the supplied
scart doubler. When this is used you do not loose the use of the scart connection, so it can
still be used for other applications. When the MegaVideo 55 is connected to the scart
doubler (using the RCA cables on the side) and the scart cable that was originally
connected to your appliance at the same time, jumper E will have to be removed. The
MegaVideo 55 ensures that picture quality is maintained.
Connecting a number of appliances
If you want to simultaneously connect several appliances to the modulator there are a
number of ways to do this:
4 MARMITEK