Publicité
EN
MAIN PARTS
OPERATION
1. Install the battery pack according to the battery pack instructions.
2. Place the device on the tile to be laid and lock it forward. The level of the tiles is adjusted using the stepless speed change function of the switch.
3. Lock the pushbutton switch back to lay the tiles; lock the pull button forward to suction the tiles.
Charging instructions
Switch off the battery pack and place it in a dedicated charger for charging. The charger will show a red light when charging and a green light when fully charged.
Normal charging time is 2 hours.
1. There is no need to keep pressing the switch during the tiling process, rhythmic progress is more conducive to tiling.
2. The machine should be placed in a dry place to avoid contact with liquid.
3. Please remove the dirt on the surface of the machine in time after use.
4. Please charge in time when the battery is insufficient, and charge it once a month when not in use for a long time.
5. Do not place the battery pack in water or expose it to rain. A short circuit of the battery will cause a large current to overheat and may
cause fire or even breakdown.
MAINTENANCE
Note: The battery must be removed before any maintenance work on the device.
1. Check the mounting screws. Always check that the mounting screws are securely fastened. Loosening screws can easily cause serious accidents.
2. Check the charger cable regularly. If any damage is found, entrust an authorized repair center to deal with it immediately.
3. Keep the ventilation slots clean and smooth. Always remove dust and oil, and prevent debris from entering.
4. Repairs must be performed by an authorized repair center. Only use original accessories and parts.
5. Clean regularly. Avoid using solvents that can cause plastic cracks to wipe plastic parts. A soft cloth slightly moistened with soapy water is recommended. Do
not expose the motor to water, and it is forbidden to put the entire body into the water, so as to avoid motor failure and electric shock!
ENVIRONMENTAL DISPOSAL
In order to avoid damages on transportation, the tool has to be delivered in solid packaging. Packaging as well as the unit and accessories are made of
recyclable materials and can be disposed accordingly. The tool's plastics components are marked according to their material, which makes it possible to remove
environmental friendly and differentiated because of available collection facilities.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with
national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
3
1. Lithium battery
2. Non-slip rubber handle
3. Start key
4. Mode key
5. Auxiliary handle
6. Absorption lever
7. Alloy head shell
8. Suction cup
WWW.NIKOLAOUTOOLS.GR
Publicité
