Publicité
Les langues disponibles
Les langues disponibles
1. Turn off the main gas supply valve.
2. Disconnect 20 lb LP gas fuel tank (if present).
3. Turn off all burner control valves.
4. Remove the 20 lb LP gas fuel tank (if present) from
the grill cart.
5. Use an adjustable wrench to remove the LP
regulator from the manifold.
6. Use an adjustable wrench to install the Natural gas
regulator hose to the manifold and secure. Attach the
Natural gas regulator to the side panel inside the grill
cart with the two screws that are preassembled on the
regulator.
GAS CONVERSIONS
Make Gas Connection
1.A combination of pipe fittings must be used to connect the
The 10 ft (3.0 m) PVC flexible gas supply hose design
Pipe-joint compounds suitable for use with Natural gas
There must be a certified manual shut-off valve in the gas
2. Connect the brass connector on one end of the 10 ft (3.0
3. Connect the quick connector on the other end of the
4.Please do leak test after conversion. See page 7.
20
grill to the existing gas line.
certified by CSA must be used.
must be used. Do not use Teflon®+ tape.
supply line near the grill for easy access.
m) PVC flexible gas supply hose to the Natural gas
pressure regulator.
10 ft (3.0 m) PVC flexible gas supply hose to the rigid
Natural gas supply pipe.
a.The outdoor cooking gas appliance and its
individual shutoff valve must be disconnected from
the gas supply piping system during any pressure
testing of that system at test pressure in excess of
0.5 psi(3.5KP)
b. The outdoor cooking gas appliance must be
isolated from the gas supply piping system by
closing its individual manual shutoff valve during
any pressure testing of the gas supply piping
system at test pressures equal to or less than ½
psi (3.5 KP).
Publicité
