Publicité
Les langues disponibles
Les langues disponibles
TO MATCH LIGHT THE SEAR BURNER AND REAR
BURNER
Hold a lit extended match near the sear burner and rear
burner ports, turn the control knob counterclockwise to
"
". Move your hand immediately once the burner is lit.
Rotate the control knob to the desired setting.
Keep a spray bottle of soapy water near the gas
supply valve and check the connections before
each use.
Do not attempt to light the grill if odor of gas is
present. Call for service U.S.A:1-800-913-8999.
Each burner is adjusted prior to shipment; however,
variations in the local gas supply may make minor
adjustments necessary.
Note: Remove all packaging, including straps, before using the grill
Grill Lighting Instructions
Place dust cap on cylinder valve outlet when the
cylinder is not in use. Only install the type of dust cap
on the cylinder valve outlet that is provided with the
cylinder valve. Other types of caps or plugs may
result in leakage of propane.
The gas must be turned off at the supply cylinder
when the unit is not in use.
If the appliance is stored indoors the cylinder must be
disconnected and removed from the appliance.
Cylinders must be stored outdoors in a well-ventilated
area out of the reach of children.
Main Burner
2
Push In
3
Control Knob, Label
9
CAUTIONS
Component Identification
Sear Burner
Publicité
