Olympia PS 43 CCD Mode D'emploi page 13

Cutting power:
Shred size:
Shred speed:
Waste bin volume:
Noise level:
Security level:
Max. power consumption:
Size (W x H x D):
Weight:
Operating cycle paper/credit card:
Operating cycle CD:
Faults Cause
Device does not Is the mains cable plugged
work properly in the socket?
Does the motor not start when
paper is inserted?
Device does not Was the device in constant
work after lengthy operation for some time?
operation or stops Is the surface of the device
during operation warm?
Jam Have you inserted more than
5 sheets of paper (80 g/m²) or
more than 1 CD/credit card?
Has the material not been
inserted straight in the in-feed
slot?
This symbol [the crossed-out wheeled bin/PICTURE] means that the
product should be brought to the return and or separate collection systems
available to end-users, when the product has reached the end of its life-
time. This symbol applies only to the countries within the EEA (*).
(*) EEA = European Economic Area, which comprises the EU Member
States plus Norway, Iceland, and Liechtenstein.
In the case of a defect, please return the device together with the receipt and original
packing material to the point-of-sale.
All manuals and user guides at all-guides.com
5 DIN A4 sheets (80 g/m²); 1 CD, 1 credit card
4 x 40 mm
2.0 m/min
11 l (0.8 l for CD bin)
approx. 72 dB
3
1.4 A
315 x 195 x 291 mm
3.1 kg
2 min. on, 60 min. off
2 min. on, 60 min. off
Device malfunctions
Disposal Notes
Guarantee
13
Remedy
Plug the mains cable into the
socket properly.
Slide the paper in the respec-
tive slot so that it touches the
sensor in the centre.
Pull out the mains plug from
the socket and allow the motor
to cool down to room tempe-
rature.
Set the sliding switch to REV
to push back the paper. Switch
the device to AUTO again to
shred the paper remaining in
the cutting unit.