Publicité
Les langues disponibles
Les langues disponibles
Connecting the P2 PRO
Single Connec
Note: A er the display driver is installed, 10W of sustained power is required for the P2 PRO to
Single Connec
receive signal.
Note: A er the display driver is installed, 10W of sustained power is required for the P2 PRO to
SINGLE CONNECTION METHODS
receive signal.
Note : After the display driver is installed, ≥15W of sustained power is required for the X3 PRO to receive
signal.
Cable Connec
CABLE CONNECTION METHODS IF ADDITIONAL POWER IS REQUIRED
Note: If your notebook computer or device does not support an output of 10W, an external
Cable Connec
Note : If your notebook computer or device does not support an output of ≥15W, an external power source is
power source is required.
required.
Note: If your notebook computer or device does not support an output of 10W, an external
power source is required.
Desktop computer connec on mode (external power)
Desktop computer connection mode
(external power)
Desktop computer connec on mode (external power)
Methods
CONNECTING THE X3 PRO
Methods
Single USB-C Cable Connec on
Single USB-C Cable Connec on
Single USB-C Cable Connection
Single USB-C to USB-A Spli er Connec on
Single USB-C to USB-A Splitter Connection
Single USB-C to USB-A Spli er Connec on
Methods if Add
Methods if Add
Mobile phone connec on mode (external power)
Mobile phone connection mode
(external power)
Mobile phone connec on mode (external power)
Power is Required
Power is Required
Laptop computer connec on mode (external power)
Laptop computer connection mode
(external power)
Laptop computer connec on mode (external power)
14
4
Publicité
