Publicité
Les langues disponibles
Les langues disponibles
•
Before using the appliance, please check the voltage and the type of plug that is
required for your location. Make sure the appliance is in perfect use conditions.
•
Before first use, remove all packing materials from the appliance and its
accessories. Clean and dry the appliance thoroughly as described in the "CARE
AND MAINTENANCE" section.
•
Place the appliance on a smooth, flat and stable working surface. Make sure the
speed control is in its "0" position.
•
Do not plug in the appliance without the blender jar assembled.
OPERATING INSTRUCTION
Prepare food for blending
- Wash all food items carefully.
- Some vegetables and fruits have to be peeled. Such are oranges, tangerines,
lemons, mangos, kiwis, melons, pineapples, etc.
- If necessary, remove pits and stones (e.g. from cherries, prunes, apricots,
peaches, etc.) and pith (e.g. from apples, pears, etc.).
- Cut vegetables and fruits into small pieces (approximately 3x3x3cm).
- Very hard products should be cut into pieces and add water when blending.
Blender use
1.
Place the blender jar on the base of the blender and turn it clockwise to lock it
in place.
2.
Put ingredients into the blender jar. Fill it below the MAX mark on the scale of
the jar. Do not overfill.
3. Close the blender lid tightly and then put on the filler cup. Do not operate the
blender unless the lid and the filler cup are correctly fitted.
4.
Make sure that the speed control is set to the "0" position.
5.
Insert the power plug into the mains supply outlet.
6.
Set the required operating mode (1/2) or use the Pulse mode to start blending.
Mode
Function
0
Off
1
Mix liquids and soft foods
2
Fruit and vegetable processing
P
For brief operation or jar cleaning
7. To add ingredients into the blender jar during operation, turn the speed control
to the "0" position and wait until the motor stops completely. Open the filler cup
and add food through the opening in the lid. To continue processing, put the
filler cup back and set the required speed (1 or 2).
8. After operation, turn the speed control to the "0" position and unplug
the blender.
9. After the motor and the blades have completely stopped, remove the blender
jar from the motor base. Open the lid, and pour out the ingredients from the
blender jar.
Note: For blending, do not operate the appliance continuously for more than 90
seconds. Let the main unit base cool down and rest for at least 3 minutes then
resume.
IMPORTANT
5
Publicité
