Steba LR 10 Plasma Mode D'emploi page 12

Workplace
Important:
Never place this device on or next to hot surfaces (e.g. hot stoves).
Only use it on a even, stable and a heat resisting surface. It is im-
portant that no inflammable items are near to the device. Do not
place the device on the edge of the table so that it cannot be
touched by children or fall down when touched.
Getting started
∙ Attach the two feet to the device.
∙ Doors and windows should be closed for
an optimal cleaning performance.
∙ Connect the device.
∙ Use the slide switch to select the desired
power level OFF I 1 I 2.
The power control lamp lights up.
∙ The plasma generator is always activated
automatically. It creates positive and
negative ions in the air that bind to
pollutants and break them down.
∙ The air intake and outlet must
never be covered.
12