Publicité
Les langues disponibles
Les langues disponibles
Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press L or M until the TV/CABLE
selection is highlighted.
3. Press
or
to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press M to select CH PROGRAM.
5. Press
or
to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press
to display the SETUP menu.
3. Press L or M to highlight ADD/
ERASE.
4. Press
or
to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1-4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel M or L on the TV or CH + or – on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
or
to display the SETUP menu.
CH
PICTURE
AUDIO
SETUP
OPTION
TV / CABLE
TV CABLE
CH PROGRAM
START
ADD / ERASE
ADD
SELECT
ADJUST
or
CH
PICTURE AUDIO
SETUP
OPTION
TV / CABLE
CABLE
CH PROGRAM
START
ADD / ERASE
ADD ERASE
SELECT
ADJUST
16
POWER
TV
VCR
CABLE
DVD
1
2
3
+10
4
5
6
100
Channel
7
8
9
0
Numbers
CH +
Channel +/–
VOL
VOL
MENU/
–
+
ENTER
Menu
CH –
EXIT
RECALL
TV/VIDEO
FAV
VOL
CH RTN
FAV
Exit
RESET CAP/TEXT
16:9
1/2
DISPLAY
DVD CLEAR
TOP MENU
DVD MENU
CODE
MTS
SLEEP
MUTE
Publicité
